3 — Troubleshooting using network alarms
3-22 Alcatel-Lucent 5620 Service Aware Manager, Release
Troubleshooting Guide 3HE 05723 TQZZA Edition 01
Figure 3-11 Site form
The MTU parameter indicates that the SDP binding maximum frame size is greater
than the actual tunnel frame size of 1492 octets that supports the SDP binding.
8 Change the MTU to a value less than 1492, for example, 1000.
9 Click on the Apply button. A warning message appears, as shown in Figure 3-12. It
warns you that changes to this Site form are not applied to the service unless you
click on the OK or Apply button in the Service form.
Figure 3-12 Warning to apply changes to all objects
10 Click on the OK button. The Services form appears.
11 Click the Apply button. The warning message in Figure 3-12 again appears.
12 Click on the Apply button. The MTU configuration change is applied to customer,
service, and site objects. The SDP binding and related service alarms clear
automatically.
To Next Page
Loading...
