5 — Troubleshooting using topology maps
5-4 Alcatel-Lucent 5620 Service Aware Manager, Release
Troubleshooting Guide 3HE 05723 TQZZA Edition 01
Table 5-4 lists icon symbols and colors for 5620 SAM alarms.
Table 5-4 Map alarm status indicators
5.2 Troubleshooting alarms using topology maps
Use the following procedures to perform network monitoring and troubleshooting
activities using the 5620 SAM maps.
Composite service icon The color and icon in the upper left corner of the composite service
icon indicate the most severe alarm on any of the devices in the
composite service.
The color of the upper middle section of the composite service icon
indicates the aggregated connectivity status of the devices in the
composite service.
The color of the upper right corner of the composite service icon
indicates the aggregated link status of the links in the composite
service.
Service tier icon The color and icon in the upper left corner of the service tier icon
indicate the most severe alarm on any of the devices belonging to
the service.
The color of the upper middle section of the service tier icon
indicates the aggregated connectivity status of the devices
belonging to the service.
The color of the upper right corner of the service icon indicates the
aggregated link status of the links belonging to the service.
Physical link The color of physical links represents the status of the link.
Gray indicates that the status of the link is unknown.
Green indicates that the link is in service.
Purple indicates that a physical link is being diagnosed.
Red indicates that the link is out of service or failed.
Map icon Alarm
Icon symbol Icon color Severity Color
——AllGrey
C Red Critical Red
M Orange Major Orange
m Yellow Minor Yellow
W Blue Warning Cyan
——ConditionMocha
— — Cleared Green
— — Info Light blue
— White No alarm —
Indicator Description
(2 of 2)
To Next Page
Loading...
