12 — 5620 SAM client GUI warning message output
12-6 Alcatel-Lucent 5620 Service Aware Manager, Release
Troubleshooting Guide 3HE 05723 TQZZA Edition 01
3 Correct the problem based on the information provided. For the example in
Figure 12-8, configure the authentication order parameters.
4 If you cannot correct the problem and continue to get the same warning message:
a Check the documentation to ensure that you are following the steps
correctly.
b Verify that you are trying to perform an action that is supported.
c Review the general troubleshooting information in section 1.3.
d If you cannot resolve the problem, perform Procedure 2-1 before you contact
your technical support representative.
To Next Page
Loading...
