IP Router Configuration
Router Configuration Guide 127
config>router>static-route-entry>indirect
config>router>static-route-entry>black-hole
Description This command creates a text description stored in the configuration file for a configuration context.
The no form of the command removes the description string from the context
Default no description
Parameters description-string — The description character string. Allowed values are any string up to 80
characters long composed of printable, 7-bit ASCII characters. If the string contains special
characters (#, $, spaces, etc.), the entire string must be enclosed within double quotes.
destination-class
Syntax [no] destination-class dest-index
Context config>router>static-route-entry>next-hop
config>router>static-route-entry>indirect
config>router>static-route-entry>black-hole
Description This command configures the policy accounting destination-class index to be used when incrementing
accounting statistic for traffic matching the associated static route.
The no form of the command removes the associated destination-class from the associated static route
nexthop.
Default no destination-class
Parameters dest-index — The destination index integer value.
Values 1 to 255
dynamic-bgp
Syntax [no] dynamic-bgp
Context config>router>static-route-entry>black-hole
Description This optional command controls the behavior of the associated static route so that if a matching BGP
route to the same exact prefix is present in BGP, the static route's nexthop is set to the BGP's nexthop
value. If there is no matching active BGP route, the static route's nexthop is set to be a black-hole
nexthop.
Default no dynamic-bgp
To Next Page
Loading...
