IP Router Configuration Command Reference
130 Router Configuration Guide
The no form of this command returns the returns the associated static route preference to its default
value.
Default 5
Parameters preference-value — Specifies the route preference value.
Values 1 to 255
prefix-list
Syntax [no] prefix-list name {all | none | any}
Context config>router>static-route-entry>next-hop
config>router>static-route-entry>indirect
config>router>static-route-entry>black-hole
Description This command associates a new constraint to the associated static route such that the static route is only
active if any, none, or all of the routes in the prefix list are present and active in the route-table.
Default no prefix-list
Parameters name — Specifies the name of a currently configured prefix-list.
all — Specifies that the static route condition is met if all prefixes in the prefix-list must be present
in the active route-table.
none — Specifies that the static route condition is met if none of the prefixes in the named prefix-
list can be present in the active route-table.
any — Specifies that the static route condition is met if any prefixes in the prefix-list are present
in the active route-table.
OSPF Internal routes 10 Yes
IS-IS level 1 internal 15 Yes
IS-IS level 2 internal 18 Yes
OSPF external 150 Yes
IS-IS level 1 external 160 Yes
IS-IS level 2 external 165 Yes
BGP 170 Yes
Table 5: Default Route Preference (Continued)
Label Preference Configurable
To Next Page
Loading...
