IP Router Configuration
Router Configuration Guide 131
priority
Syntax [no] priority {low | high}
Context config>router>static-route-entry>next-hop>forwarding-class
config>router>static-route-entry>indirect>forwarding-class
Description This optional command associates an enqueuing priority with the static route. The options are either
high or low, with low being the default. This parameter has the ability to affect the likelihood that a
packet will be enqueued at SAP ingress in the face of ingress congestion.
Once a packet is enqueued into an ingress buffer, the significance of this parameter is lost.
Default priority low
Parameters low — Setting the enqueuing parameter for a packet to low decreases the likelihood of enqueuing
the packet when the ingress queue is congested. Ingress enqueuing priority only affects
ingress SAP queuing. Once the packet is placed in a buffer on the ingress queue, the
significance of the enqueuing priority is lost.
high — Setting the enqueuing parameter for a packet to high increases the likelihood of
enqueuing the packet when the ingress queue is congested. Ingress enqueuing priority only
affects ingress SAP queuing. Once the packet is placed in a buffer on the ingress queue, the
significance of the enqueuing priority is lost..
shutdown
Syntax [no] shutdown
Context config>router>static-route-entry>black-hole
config>router>static-route-entry>indirect
config>router>static-route-entry>next-hop
Description This command causes the static route to be placed in an administratively down state and removed from
the active route-table
Default no shutdown
source-class
Syntax [no] source-class source-index
Context config>router>static-route-entry>indirect
config>router>static-route-entry>next-hop
Description This command configures the policy accounting source-class index to be used when incrementing
accounting statistic for traffic matching the associated static route.
To Next Page
Loading...
