Alcatel-Lucent 7450 - Page 220

IP Router Configuration Command Reference
220 Router Configuration Guide
Context config>router>if>dhcp>option
Description This command configures the Alcatel-Lucent vendor specific suboption of the DHCP relay packet.
client-mac-address
Syntax [no] client-mac-address
Context config>router>if>dhcp>option
Description This command enables the sending of the MAC address in the Alcatel-Lucent vendor specific
suboption of the DHCP relay packet.
The no form of the command disables the sending of the MAC address in the Alcatel-Lucent vendor
specific suboption of the DHCP relay packet.
pool-name
Syntax [no] pool-name
Context config>router>if>dhcp>option>vendor-specific-option
Description This command enables the sending of the pool name in the Alcatel vendor-specific suboption of the
DHCP relay packet.
The no form of the command disables the feature.
port-id
Syntax [no] port-id
Context config>router>if>dhcp>option>vendor-specific-option
Description This command enables sending of the port-id in the Alcatel vendor specific suboption of the DHCP
relay packet
The no form of the command disables the sending.
service-id
Syntax [no] service-id
Context config>router>if>dhcp>option>vendor-specific-option
Description This command enables the sending of the service ID in the Alcatel-Lucent vendor specific suboption
of the DHCP relay packet.