Alcatel-Lucent 7450 - Page 221

IP Router Configuration
Router Configuration Guide 221
The no form of the command disables the sending of the service ID in the Alcatel-Lucent vendor
specific suboption of the DHCP relay packet.
string
Syntax [no] string text
Context config>router>if>dhcp>option>vendor-specific-option
Description This command specifies the vendor specific suboption string of the DHCP relay packet.
The no form of the command returns the default value.
Parameters text — The string can be any combination of ASCII characters up to 32 characters in length. If
spaces are used in the string, enclose the entire string in quotation marks (“ ”).
system-id
Syntax [no] system-id
Context config>router>if>dhcp>option>vendor-specific-option
Description This command specifies whether the system-id is encoded in the Alcatel-Lucent vendor specific sub-
option of Option 82.
Default None
relay-plain-bootp
Syntax [no] relay-plain-bootp
Context config>router>if>dhcp
Description This command enables the relaying of plain BOOTP packets.
The no form of the command disables the relaying of plain BOOTP packets.
server
Syntax server server1 [server2...(up to 8 max)]
Context config>router>if>dhcp