Alcatel-Lucent 7450 - Page 238

Show, Clear, and Debug Command Reference
238 Router Configuration Guide
10.20.1.24 00:16:4d:23:91:b8 00h00m00s Oth system
10.10.4.11 00:03:fa:00:d0:c9 00h57m03s Dyn[I] to-core-sr1
10.10.4.24 00:03:fa:41:8d:20 00h00m00s Oth[I] to-core-sr1
-------------------------------------------------------------------------------
No. of ARP Entries: 3
===============================================================================
A:ALA-A# show router ARP 10.10.0.3
===============================================================================
ARP Table
===============================================================================
IP Address MAC Address Expiry Type Interface
-------------------------------------------------------------------------------
10.10.0.3 04:5d:ff:00:00:00 00:00:00 Oth system
===============================================================================
A:ALA-A#
A:ALA-A# show router ARP to-ser1
===============================================================================
ARP Table
===============================================================================
IP Address MAC Address Expiry Type Interface
-------------------------------------------------------------------------------
10.10.13.1 04:5b:01:01:00:02 03:53:09 Dyn to-ser1
===============================================================================
A:ALA-A#
authentication
Syntax authentication
Context show>router
Description This command enables the command to display authentication statistics.
statistics
Syntax statistics
statistics interface [ip-int-name | ip-address]
statistics policy name
Context show>router>authentication
Description This command displays interface or policy authentication statistics.
Parameters interface [ip-int-name | ip-address] — Specifies an existing interface name or IP address.
Values ip-int-name: 32 chars max
ip-address: a.b.c.d
policy name — Specifies an existing policy name.