IP Router Configuration
Router Configuration Guide 239
Output Authentication Statistics Output — The following table describes the show authentication statistics
output fields:
Sample Output
A:ALU-3>show>router>auth# statistics
===================================================================
Authentication Global Statistics
===================================================================
Client Packets Authenticate Fail : 0
Client Packets Authenticate Ok : 12
===================================================================
A:ALU-3>
bfd
Syntax bfd
Context show>router
Description This command enables the context to display bi-directional forwarding detection (BFD) information.
Output
Sample Output
*A:Dut-D# show router 3 bfd session
===============================================================================
BFD Session
===============================================================================
InterfaceState Tx Intvl Rx Intvl Multipl
Remote Address Protocols Tx Pkts Rx Pkts Type
-------------------------------------------------------------------------------
ies-3-121.1.3.3 Up (3) 10 10 3
121.1.3.2 ospf2 N/A N/A cpm-np
ies-3-122.1.4.3 Up (3) 100 100 3
122.1.4.2 pim 455 464 iom
-------------------------------------------------------------------------------
No. of BFD sessions: 2
===============================================================================
*A:Dut-D#
Table 8: Authentication Statistics Field Descriptions
Label Description
Client Packets
Authenticate Fail
The number of packets that failed authentication.
Client Packets
Authenticate Ok
The number of packets that were authenticated.
To Next Page
Loading...
