Alcatel-Lucent 7450 - Page 242

Show, Clear, and Debug Command Reference
242 Router Configuration Guide
interface
Syntax interface [interface-name]
Context show>router>bfd
Description This command displays interface information.
Output BFD interface Output — The following table describes the show BFD interface output fields:
Sample Output
*A:Dut-B# show router bfd interface
===============================================================================
BFD Interface
===============================================================================
Interface name Tx Interval Rx Interval Multiplier
-------------------------------------------------------------------------------
port-1-1 500 500 3
port-1-1 10 10 3
port-1-2 500 500 3
port-1-2 10 10 3
port-1-3 500 500 3
port-1-3 10 10 3
port-1-4 500 500 3
port-1-4 10 10 3
port-1-5 500 500 3
...
===============================================================================
*A:Dut-B#
session
Syntax session detail lsp-rsvp {head | tail}
session {ipv4 | ipv6} detail [lag lag-id] lag-port port-id
session lsp-name Lsp Name
session lsp-rsvp {head | tail}
session src ip-address/link-local address dest ip-address | link-local address detail lsp-
Table 9: BFD Interface Field Descriptions
Label Description
TX Interval Displays the interval, in milliseconds, between the transmitted BFD
messages to maintain the session
RX Interval Displays the expected interval, in milliseconds, between the received
BFD messages to maintain the session
Multiplier Displays the integer used by BFD to declare when the neighbor is down.