Alcatel-Lucent 7450 - Page 243

IP Router Configuration
Router Configuration Guide 243
rsvp {head | tail} tunnel-id tunnel-id lsp-id lsp-id
session mpls-tp
session lsp-name Lsp Name [link-type {cc-only | cc-cv}] detail
session p2mp-interface interface-name detail
session src ip-address/link-local address detail lsp-rsvp {head | tail} rsvp-session-name
rsvp-session-name
session [src ip-address/link-local address] [ipv4 | ipv6]
session src ip-address/link-local address dest ip-address | link-local address
session src ip-address/link-local address detail
session summary
session type type [ipv4 | ipv6]
Context show>router>bfd
Description This command displays session information.
Parameters ip-address — Only displays the interface information associated with the specified IP address.
Values ipv4-address: a.b.c.d (host bits must be 0)
type — Specifies the session type.
Values iom | central | cpm-np
Output BFD Session Output — The following table describes the show BFD session output fields:
Sample Output
A:Dut-B# show router bfd session
===============================================================================
BFD Session
===============================================================================
Interface State Tx Intvl Rx Intvl Multipl
Remote Address Protocols Tx Pkts Rx Pkts Type
Table 10: BFD Session Field Descriptions
Label Description
State Displays the administrative state for this BFD session.
Protocol Displays the active protocol.
Tx Intvl Displays the interval, in milliseconds, between the transmitted BFD
messages to maintain the session
Tx Pkts Displays the number of transmitted BFD packets.
Rx Intvl Displays the expected interval, in milliseconds, between the received BFD
messages to maintain the session
Rx Pkts Displays the number of received packets.
Mult Displays the integer used by BFD to declare when the neighbor is down.