Show, Clear, and Debug Command Reference
312 Router Configuration Guide
A:ALA-A#
sgt-qos
Syntax sgt-qos
Context show>router
Description This command displays self-generated traffic QoS related information.
application
Syntax application [app-name] [dscp | dot1p]
Context show>router>sgt-qos
Description This command displays application QoS settings.
Parameters app-name — The specific application.
Values arp, bgp, cflowd, dhcp, dns, ftp, icmp, igmp, isis, ldp, mld, msdp,
ndis, ntp, ospf, pimradius, rip, rsvpsnmp, snmp-notification, srrp,
ssh, syslog, tacplus, telnet, tftp, traceroute, vrrp, pppoe
dscp-map
Syntax dscp-map [dscp-name]
Context show>router>sgt-qos
Description This command displays DSCP to FC mappings.
Parameters dscp-name — The specific DSCP name.
Values be, ef, cp1, cp2, cp3, cp4, cp5, cp6, cp7, cp9, cs1, cs2, cs3, cs4,
cs5, nc1, nc2, af11, af12, af13, af21, af22, af23, af31, af32, af33,
af41, af42, af43, cp11, cp13, cp15, cp17, cp19, cp21, cp23, cp25,
cp27, cp29, cp31, cp33, cp35, cp37, cp39, cp41, cp42, cp43, cp44,
cp45, cp47, cp49, cp50, cp51, cp52, cp53, cp54, cp55, cp57, cp58,
cp59, cp60, cp61, cp62, cp63
status
Syntax status
Context show>router
To Next Page
Loading...
