Alcatel-Lucent 7450 - Page 327

IP Router Configuration
Router Configuration Guide 327
group
Syntax group [tunnel-group-name [statistics]]
Context show>router>l2tp
Description This command displays L2TP group operational information.
Parameters tunnel-group-name — Displays information for the specified tunnel group.
statistics — Displays statistics for the specified tunnel group.
Output
Sample Output
*A:Dut-C# show router l2tp group
===============================================================================
L2TP Groups
===============================================================================
Group Name Ses Limit Ses Assign State Tun Active Ses Active
Tun Total Ses Total
-------------------------------------------------------------------------------
isp1.group-1
131071 existingFirst active 1 1
1 1
isp1.group-2
131071 weighted active 2 5
3 8
-------------------------------------------------------------------------------
No. of L2TP Groups: 2
===============================================================================
*A:Dut-C#
*A:Dut-C# show router l2tp group isp1.group-2
===============================================================================
Group Name: isp1.group-2
===============================================================================
Conn ID Loc-Tu-ID Rem-Tu-ID State Ses Active
Group Ses Total
Assignment
-------------------------------------------------------------------------------
143523840 2190 17525 established 2
isp1.group-2 3
isp1.tunnel-3
236912640 3615 58919 closedByPeer 0
isp1.group-2 2
isp1.tunnel-2
658178048 10043 33762 draining 3
isp1.group-2 3
isp1.tunnel-2
-------------------------------------------------------------------------------
No. of tunnels: 3
===============================================================================
*A:Dut-C#