Show, Clear, and Debug Command Reference
328 Router Configuration Guide
*A:Dut-C# show router l2tp group isp1.group-2 statistics
Group Name: isp1.group-2
-------------------------------------------------------------------------------
Attempts Failed Failed-Aut Active Total
-------------------------------------------------------------------------------
Tunnels 3 0 0 2 3
Sessions 8 0 N/A 5 8
-------------------------------------------------------------------------------
-------------------------------------------------------------------------------
Pkt-Ctl Pkt-Err Octets
-------------------------------------------------------------------------------
Rx 51 0 1224
Tx 51 0 2796
-------------------------------------------------------------------------------
*A:Dut-C#
peer
Syntax peer ip-address
peer ip-address statistics
peer [draining] [unreachable]
Context show>router>l2tp
Description This command displays L2TP peer operational information.
Parameters ip-address — Display information for the specified IP address of the peer.
draining — Displays peer objects set to drain.
unreachable — Displays peers that are deemed unreachable.
statistics — Displays the statistics for the given IP address.
Output
Sample Output
*A:Dut-C# show router l2tp peer
===============================================================================
L2TP Peers
===============================================================================
Peer IP Tun Active Ses Active
Drain Unreach Role Tun Total Ses Total
-------------------------------------------------------------------------------
10.10.14.8 1 1
LAC 1 1
10.10.20.100 1 3
drain LAC 2 5
10.10.20.101 0 0
unreach LAC 1 1
-------------------------------------------------------------------------------
No. of peers: 3
To Next Page
Loading...
