Show, Clear, and Debug Command Reference
338 Router Configuration Guide
Secondary NBNS : N/A
Address-Pool : N/A
IPv6 Prefix : N/A
IPv6 Del.Pfx. : N/A
Primary IPv6 DNS : N/A
Secondary IPv6 DNS : N/A
Circuit-Id : (Not Specified)
Remote-Id : (Not Specified)
Session-Timeout : N/A
Radius Class : (Not Specified)
Radius User-Name : simon@base.lac.base.lns
statistics
Syntax statistics
Context show>router>l2tp
Description This command displays L2TP statistics.
Output
Sample Output
*A:Dut-C# show router l2tp statistics
===============================================================================
L2TP Statistics
===============================================================================
Tunnels Sessions
-------------------------------------------------------------------------------
Active : 3 Active : 6
Setup history since 04/17/2009 18:38:41
Total : 4 Total : 9
Failed : 0 Failed : 0
Failed Auth : 0
===============================================================================
*A:Dut-C#
tunnel
Syntax tunnel [statistics] [detail] [peer ip-address] [state tunnel-state] [remote-connection-id
remote-connection-id (v3)] [group group-name] [assignment-id assignment-id] [local-name
host-name] [remote-name host-name]
tunnel [statistics] [detail] [peer ip-address] [state tunnel-state] [remote-tunnel-id remote-
tunnel-id (v2)] [group group-name] [assignment-id assignment-id] [local-name host-name]
[remote-name host-name]
To Next Page
Loading...
