IP Router Configuration
Router Configuration Guide 361
Values The following values apply to the 7450 ESS:
longer — Specifies the prefix list entry matches any route that matches the specified ip-prefix and
prefix mask length values greater than the specified mask.
tunnel-table
Syntax tunnel-table [ip-address] [ldp | rsvp [tunnel-id tunnel-id] | sdp [sdp-id sdp-id]]
Context debug>router>ip
Description This command enables debugging for tunnel tables.
mtrace
Syntax [no] mtrace
Context debug>router
Description This command configures debugging for mtrace.
tms
Syntax [no] tms [interface tms-interface] api [detail] tms-interface
Context debug>router
Description This command configures debugging for Threat Management Services.
ipv4-prefix a.b.c.d (host bits must be 0)
ipv4-prefix-length 0 to 32
ipv6-prefix x:x:x:x:x:x:x:x (eight 16-bit
pieces)
x:x:x:x:x:x:d.d.d.d
x: [0 to FFFF]H
d: [0 to 255]D
ipv6-prefix-length 0 to 128
ipv4-prefix a.b.c.d (host bits must be 0)
ipv4-prefix-length 0 to 32
To Next Page
Loading...
