Alcatel-Lucent 7450 - Page 453

VRRP
Router Configuration Guide 453
Owner : No VRRP State : Master
Primary IP of Master: FE80::1 (Self)
Primary IP : FE80::1
Standby-Forwarding: Disabled
VRRP Backup Addr : 5::10
: FE80::10
Admin State : Up Oper State : Up
Up Time : 09/23/2004 06:55:12 Virt MAC Addr : 00:00:5e:00:02:0a
Config Mesg Intvl : 1.0 In-Use Mesg Intvl : 1.0
Master Inherit Intvl: Yes
Base Priority : 100 In-Use Priority : 100
Policy ID : n/a Preempt Mode : Yes
Ping Reply : No Telnet Reply : No
Traceroute Reply : No
Init Delay : 0 Init Timer Expires: 0.000 sec
Creation State : Active
-------------------------------------------------------------------------------
Master Information
-------------------------------------------------------------------------------
Primary IP of Master: FE80::1 (Self)
Addr List Mismatch : No Master Priority : 100
Master Since : 09/23/2004 06:55:16
=============================================================================
Masters Seen (Last 32)
===============================================================================
Primary IP of Master
Last Seen Addr List Mismatch Msg Count
-------------------------------------------------------------------------------
FE80::1
09/23/2004 06:55:16 No 0
-------------------------------------------------------------------------------
Statistics
-------------------------------------------------------------------------------
Master Transitions : 1 Discontinuity Time: 09/09/2004 01:57*
Adv Sent : 23 Adv Received : 0
Pri Zero Pkts Sent : 0 Pri Zero Pkts Rcvd: 0
Preempt Events : 0 Preempted Events : 0
Mesg Intvl Discards : 0 Mesg Intvl Errors : 0
Total Discards : 0 Addr List Errors : 0
Auth Failures : 0 Invalid Pkt Type : 0
IP TTL Errors : 0 Pkt Length Errors : 0
===============================================================================
* indicates that the corresponding row element may have been truncated.
policy
Syntax policy [vrrp-policy-id [event event-type specific-qualifier]]
Context show>vrrp
Description This command displays VRRP priority control policy information.
If no command line options are specified, a summary of the VRRP priority control event policies
displays.