Show, Monitor, Clear, and Debug Command Reference
454 Router Configuration Guide
Parameters vrrp-policy-id — Displays information on the specified priority control policy ID.
Default All VRRP policies IDs
Values 1 to 9999
event event-type — Displays information on the specified VRRP priority control event within the
policy ID.
Default All event types and qualifiers
Values port-down port-id
lag-port-down lag-id
host-unreachable host-ip-addr
route-unknown route-prefix/mask
mc-ipsec-non-forwarding
specific-qualifier — Display information about the specified qualifier.
Values port-id, lag-id, host-ip-addr, route-prefix/mask, tunnel-group-id
Output VRRP Policy Output — The following table describes the VRRP policy command output fields.
Table 40: VRRP Policy Output Fields Descriptions
Label Description
Policy Id The VRRP priority control policy associated with the VRRP virtual
router instance.
A value of 0 indicates that no control policy is associated with the
virtual router instance.
Current Priority & Effects
Current Explicit When multiple explicitly defined events associated with the priority
control policy happen simultaneously, the lowest value of all the current
explicit priorities will be used as the in-use priority for the virtual router.
Current Delta Sum The sum of the priorities of all the delta events when multiple delta
events associated with the priority control policy happen
simultaneously. This sum is subtracted from the base priority of the
virtual router to give the in-use priority.
Delta Limit The delta-in-use-limit for a VRRP policy. Once the total sum of all delta
events has been calculated and subtracted from the base-priority of the
virtual router, the result is compared to the delta-in-use-limit value. If
the result is less than this value, the delta-in-use-limit value is used as
the virtual router in-use priority value. If an explicit priority control
event overrides the delta priority control events, the delta-in-use-limit
has no effect.
If the delta-in-use-limit is 0, the sum of the delta priority control events
to reduce the virtual router's in-use-priority to 0 can prevent it from
becoming or staying master.
To Next Page
Loading...
