Show, Clear, Monitor, and Debug Command Reference
608 Router Configuration Guide
Applied No
The filter policy ID has not been applied.
Yes
The filter policy ID is applied.
Def. Action Forward
The default action for the filter ID for packets that do not match the
filter entries is to forward.
Drop
The default action for the filter ID for packets that do not match the
filter entries is to drop.
Filter Match Criteria IP
Indicates the filter is an IP filter policy.
Entry The filter ID filter entry ID. If the filter entry ID indicates the entry is
(Inactive), then the filter entry is incomplete as no action has been
specified.
Log Id The filter log ID.
Src. IP The source IPv6 address and prefix length match criterion.
Dest. IP The destination IPv6 address and prefix length match criterion.
Next-header The next header ID for the match criteria. Undefined indicates no next-
header specified.
ICMP Type The ICMP type match criterion. Undefined indicates no ICMP type
specified.
Fragment False
Configures a match on all non-fragmented IP packets.
True
Configures a match on all fragmented IP packets.
Off
Fragments are not a matching criteria. All fragments and non-fragments
implicitly match.
Sampling Off
Specifies that traffic sampling is disabled.
On
Specifies that traffic matching the associated IP filter entry is sampled.
Table 51: Filter IP with Filter-ID Specified Output Field Descriptions (Continued)
Label Description
To Next Page
Loading...
