Alcatel-Lucent 7450 - Page 610

Show, Clear, Monitor, and Debug Command Reference
610 Router Configuration Guide
Sample Output:
A:ALA-49>config>filter# show filter ip 3
===============================================================================
IP Filter
===============================================================================
Filter Id : 3 Applied : Yes
Scope : Template Def. Action : Drop
Entries : 1
-------------------------------------------------------------------------------
Filter Match Criteria : IP
-------------------------------------------------------------------------------
Entry : 10
Log Id : n/a
Src. IP : 10.1.1.1/24 Src. Port : None
Dest. IP : 0.0.0.0/0 Dest. Port : None
Protocol : 2 Dscp : Undefined
ICMP Type : Undefined ICMP Code : Undefined
TCP-syn : Off TCP-ack : Off
Match action : Drop
Ing. Matches : 0 Egr. Matches : 0
===============================================================================
A:ALA-49>config>filter#
Int. Sampling Off
Interface traffic sampling is disabled.
On
Interface traffic sampling is enabled.
Multiple Option Off
The option fields are not checked.
On
Packets containing one or more option fields in the IP header will be
used as IP filter match criteria.
TCP-ack False
Configures a match on packets with the ACK flag set to false.
True
Configures a match on packets with the ACK flag set to true.
Off
The state of the TCP ACK flag is not considered as part of the match
criteria. as part of the match criteria.
Egr. Matches The number of egress filter matches/hits for the filter entry.
Table 51: Filter IP with Filter-ID Specified Output Field Descriptions (Continued)
Label Description