Filter Policies
Router Configuration Guide 613
Def. Action Forward
The default action for the filter ID for packets that do not match the
filter entries is to forward.
Drop
The default action for the filter ID for packets that do not match the
filter entries is to drop.
Service Id The service ID on which the filter policy ID is applied.
SAP The Service Access Point on which the filter policy ID is applied.
(Ingress) The filter policy ID is applied as an ingress filter policy on the interface.
(Egress) The filter policy ID is applied as an egress filter policy on the interface.
Type The type of service of the service ID.
Entry The filter ID filter entry ID. If the filter entry ID indicates the entry is
Inactive, the filter entry is incomplete as no action was specified.
Log Id The filter log ID.
Src. IP The source IP address and mask match criterion. 0.0.0.0/0 indicates no
criterion specified for the filter entry.
Dest. IP The destination IP address and mask match criterion. 0.0.0.0/0 indicates
no criterion specified for the filter entry.
Protocol The protocol ID for the match criteria. Undefined indicates no protocol
specified.
ICMP Type The ICMP type match criterion. Undefined indicates no ICMP type
specified.
Fragment False
Configures a match on all non-fragmented IP packets.
True
Configures a match on all fragmented IP packets.
Off
Fragments are not a matching criteria. All fragments and nonfragments
implicitly match.
Table 52: Filter IP Associations Output Field Descriptions (Continued)
Label Description
To Next Page
Loading...
