Show, Clear, Monitor, and Debug Command Reference
614 Router Configuration Guide
Sampling Off
Specifies that traffic sampling is disabled.
On
Specifies that traffic matching the associated IP filter entry is sampled.
IP-Option Specifies matching packets with a specific IP option or a range of IP
options in the IP header for IP filter match criteria.
TCP-syn False
Configures a match on packets with the SYN flag set to false.
True
Configured a match on packets with the SYN flag set to true.
Off
The state of the TCP SYN flag is not considered as part of the match
criteria.
Match action Default
The filter does not have an explicit forward or drop match action
specified. If the filter entry ID indicates the entry is Inactive, the filter
entry is incomplete (no action was specified).
Drop
Drop packets matching the filter entry.
Forward
The explicit action to perform is forwarding of the packet. If the action
is Forward, then if configured the nexthop information should be
displayed, including Nexthop: <IP address>, Indirect: <IP address> or
Interface: <IP interface name>.
Ing. Matches The number of ingress filter matches/hits for the filter entry.
Src. Port The source TCP, UDP, or SCTP port number, port range, or port match
list.
Dest. Port The destination TCP, UDP, or SCTP port number, port range, or port
match list.
Dscp The DiffServ Code Point (DSCP) name.
ICMP Code The ICMP code field in the ICMP header of an IP packet.
Table 52: Filter IP Associations Output Field Descriptions (Continued)
Label Description
To Next Page
Loading...
