Filter Policies
Router Configuration Guide 615
Sample Output:
A:ALA-49# show filter ip 1 associations
===============================================================================
IP Filter
===============================================================================
Filter Id : 1 Applied : Yes
Scope : Template Def. Action : Drop
Entries : 1
-------------------------------------------------------------------------------
Filter Association : IP
-------------------------------------------------------------------------------
Service Id : 1001 Type : VPLS
- SAP 1/1/1:1001 (Ingress)
Service Id : 2000 Type : IES
- SAP 1/1/1:2000 (Ingress)
Option-present Off
Specifies not to search for packets that contain the option field or have
an option field of zero.
On
Matches packets that contain the option field or have an option field of
zero be used as IP filter match criteria.
Int. Sampling Off
Interface traffic sampling is disabled.
On
Interface traffic sampling is enabled.
Multiple Option Off
The option fields are not checked.
On
Packets containing one or more option fields in the IP header will be
used as IP filter match criteria.
TCP-ack False
Configures a match on packets with the ACK flag set to false.
True
configures a match on packets with the ACK flag set to true.
Off
The state of the TCP ACK flag is not considered as part of the match
criteria.h criteria.
Egr. Matches The number of egress filter matches/hits for the filter entry.
Table 52: Filter IP Associations Output Field Descriptions (Continued)
Label Description
To Next Page
Loading...
