Show, Clear, Monitor, and Debug Command Reference
620 Router Configuration Guide
Show Filter (with filter-id specified) — The following table describes the command output for the
command when a filter ID is specified.
Table 55: Filter IPv6 with Filter-ID Specified Output Field Descriptions
Label Description
Filter Id The IP filter policy ID.
Scope Template
The filter policy is of type template.
Exclusive
The filter policy is of type exclusive.
Entries The number of entries configured in this filter ID.
Description The IP filter policy description.
Applied No
The filter policy ID has not been applied.
Yes
The filter policy ID is applied.
Def. Action Forward
The default action for the filter ID for packets that do not match the
filter entries is to forward.
Drop
The default action for the filter ID for packets that do not match the
filter entries is to drop.
Filter Match Criteria IP
Indicates the filter is an IP filter policy.
Entry The filter ID filter entry ID. If the filter entry ID indicates the entry is
(Inactive), then the filter entry is incomplete as no action has been
specified.
Log Id The filter log ID.
Src. IP The source IP address and mask match criterion. 0.0.0.0/0 indicates no
criterion specified for the filter entry.
Dest. IP The destination IP address and mask match criterion. 0.0.0.0/0 indicates
no criterion specified for the filter entry.
Protocol The protocol ID for the match criteria. Undefined indicates no protocol
specified.
To Next Page
Loading...
