Filter Policies
Router Configuration Guide 621
ICMP Type The ICMP type match criterion. Undefined indicates no ICMP type
specified.
Fragment False
Configures a match on all non-fragmented IP packets.
True
Configures a match on all fragmented IP packets.
Off
Fragments are not a matching criteria. All fragments and nonfragments
implicitly match.
Sampling Off
Specifies that traffic sampling is disabled.
On
Specifies that traffic matching the associated IP filter entry is sampled.
IP-Option Specifies matching packets with a specific IP option or a range of IP
options in the IP header for IP filter match criteria.
TCP-syn False
Configures a match on packets with the SYN flag set to false.
True
Configured a match on packets with the SYN flag set to true.
Off
The state of the TCP SYN flag is not considered as part of the match
criteria.
Match action Default
The filter does not have an explicit forward or drop match action
specified. If the filter entry ID indicates the entry is (Inactive), then the
filter entry is incomplete as no action has been specified.
Drop
Drop packets matching the filter entry.
Forward
The explicit action to perform is forwarding of the packet. If the action
is Forward, then if configured the nexthop information should be
displayed, including Nexthop: <IP address>, Indirect: <IP address> or
Interface: <IP interface name>.
Ing. Matches The number of ingress filter matches/hits for the filter entry.
Table 55: Filter IPv6 with Filter-ID Specified Output Field Descriptions (Continued)
Label Description
To Next Page
Loading...
