Show, Clear, Monitor, and Debug Command Reference
622 Router Configuration Guide
Sample Output
Src. Port The source TCP, UDP, or SCTP port number, port range, or port match
list.
Dest. Port The destination TCP, UDP, or SCTP port number, port range, or port
match list.
Dscp The DiffServ Code Point (DSCP) name.
ICMP Code The ICMP code field in the ICMP header of an IP packet.
Option-present Off
Specifies not to search for packets that contain the option field or have
an option field of zero.
On
Matches packets that contain the option field or have an option field of
zero be used as IP filter match criteria.
Int. Sampling Off
Interface traffic sampling is disabled.
On
Interface traffic sampling is enabled.
Multiple Option Off
The option fields are not checked.
On
Packets containing one or more option fields in the IP header will be
used as IP filter match criteria.
TCP-ack False
Configures a match on packets with the ACK flag set to false.
True
Configured a match on packets with the ACK flag set to true.
Off
The state of the TCP ACK flag is not considered as part of the match
criteria.
Egr. Matches The number of egress filter matches/hits for the filter entry.
Ing. Rate-limiter The number of offered, forwarded, and dropped packet matches for the
filter entry.
Table 55: Filter IPv6 with Filter-ID Specified Output Field Descriptions (Continued)
Label Description
To Next Page
Loading...
