Filter Policies
Router Configuration Guide 653
*A:Dut-C>tools>dump>filter>resources># mac 1
===============================================================================
Resource utilization details for Mac filter 1
===============================================================================
CPM entries used : 1
CPM subentries used : 1
TCAM entries used (per FlexPath) : 1
Associated with IOMs : 1
---------------------------------------------------------------------------
Largest 5 entries
---------------------------------------------------------------------------
Entry ID Active TCAM entries
(per FlexPath)
---------------------------------------------------------------------------
1 Yes 1
No more entries defined
---------------------------------------------------------------------------
===============================================================================
activate-best-dest
Syntax activate-best-dest
Context tools>perform>filter>redirect-policy
Description This command allows the operator to force a PBR switch to the best destination selected by the redirect
policy when that destination is not currently active as result of sticky destination functionality being
enabled for the specified redirect policy. If hold-time-up is running, the timer is also expired.
activate-primary-action
Syntax activate-primary-action
Context tools>perform>filter>ip-filter>entry
tools>perform>filter>ipv6-filter>entry
tools>perform>filter>mac-filter>entry
Description This command allows operator to activate the primary action for the given filter policy entry. If the
primary action is already active, the command has no effect. If a secondary action is active, the primary
action will be activated unless down. If the hold-time-up is running for the primary action entry, the
timer is also expired.
To Next Page
Loading...
