Cflowd
Router Configuration Guide 737
Context config>cflowd>collector>aggregation
Description This command specifies that the aggregation data is based on destination prefix information.
The no form removes this type of aggregation from the collector configuration.
Default none
protocol-port
Syntax [no] protocol-port
Context config>cflowd>collector>aggregation
Description This command specifies that flows be aggregated based on the IP protocol, source port number, and
destination port number.
The no form of this command removes this type of aggregation from the collector configuration.
Default none
raw
Syntax [no] raw
Context config>cflowd>collector>aggregation
Description This command configures raw (unaggregated) flow data to be sent in Version 5.
The no form of this command removes this type of aggregation from the collector configuration.
Default none
source-destination-prefix
Syntax [no] source-destination-prefix
Context config>cflowd>collector>aggregation
Description This command configures cflowd aggregation based on source and destination prefixes.
The no form of this command removes this type of aggregation from the collector configuration.
Default none
To Next Page
Loading...
