Show, Tools, and Clear Command Reference
748 Router Configuration Guide
interface
Syntax interface [ip-addr | ip-int-name]
Context show>cflowd
Description Displays the administrative and operational status of the interfaces with cflowd enabled.
Parameters ip-addr — Display only information for the IP interface with the specified IP address.
Default all interfaces with cflowd enabled.
ip-int-name — Display only information for the IP interface with the specified name.
Default all interfaces with cflowd enabled.
Output Table 81 describes the show cflowd interface output fields.
Sample Output
B:sr-002# show cflowd interface [ip-addr | ip-int-name]
===============================================================================
Cflowd Interfaces
===============================================================================
Interface Router IF Index Mode Admin
IPv4 Address Oper IPv4
IPv6 Address Oper IPv6
Table 81: Cflowd Interface Output Field Descriptions
Label Description
Interface Displays the physical port identifier.
IPv4 Address Displays the primary IPv4 address for the associated IP interface.
IPv6 Address Displays the primary IPv6 address for the associated IP interface.
Router Displays the virtual router index (Base = 0).
IF Index Displays the Global IP interface index.
Mode Displays the cflowd sampling type and direction.
intf — Interface based sampling
acl — ACL based sampling
ingr — Ingress sampling
egr — Egress sampling
both — Both ingress and egress sampling
Admin Displays the administrative state of the interface.
Opr-IPv4 Displays the operational state for IPv4 sampling.
Opr-IPv6 Displays the operational state for IPv6 sampling.
To Next Page
Loading...
