Show, Tools, and Clear Command Reference
750 Router Configuration Guide
Description This command displays basic information regarding the administrative and operational status of
cflowd.
Output Table 82 describes the show cflowd status output fields.
Table 82: Cflowd Status Output
Label Description
Cflowd Admin Status The desired administrative state for this Cflowd remote collector host.
Cflowd Oper Status The current operational status of this Cflowd remote collector host.
Active Timeout The maximum amount of time, in minutes, before an active flow will be
exported. If an individual flow is active for this amount of time, the flow
is exported and a new flow is created.
Inactive Timeout Inactive timeout in seconds.
Template Retransmit The time in seconds before template definitions are sent.
Cache Size The maximum number of active flows to be maintained in the flow
cache table.
Overflow The percentage number of flows to be flushed when the flow cache size
has been exceeded.
Sample Rate The rate at which traffic is sampled and forwarded for Cflowd analysis.
one (1)
All packets are analyzed.
1000 (default)
Every 1000th packet is analyzed.
Active Flows The current number of active flows being collected.
Total Pkts Rcvd The total number of packets sampled and forwarded for Cflowd
analysis.
Total Pkts Dropped The total number of packets dropped.
Aggregation Info:
Type The type of data to be aggregated and to the collector.
Status enabled
Specifies that the aggregation type is enabled.
disabled
Specifies that the aggregation type is disabled.
Sent The number of packets with flow date sent to the associated collector.
To Next Page
Loading...
