EasyManua.ls Logo

Alcatel-Lucent 7450 - Page 755

Alcatel-Lucent 7450
778 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Cflowd
Router Configuration Guide 755
Sample Output
1 2 3 4 5 6 7 8
12345678901234567890123456789012345678901234567890123456789012345678901234567890
Sr1# tools dump cflowd top-flows ipv4
Ingress i/f SrcIP Egress i/f DstIP Pr TOS Flgs Pkts
vRtr-ID S-Port Msk AS D-Port Msk AS NextHop Avg Pkt Size Active
----------------------------------------------------------------------------------
1000 52.52.52.1 2001 123.123.123.122 0x01 55 0x10 3748
10201 0000 /8 50 0000 /8 40 202.120.130.2 220 3600
……
1 2 3 4 5 6 7 8
TOS Displays the Type of Service/DSCP buts filed markings.
Flgs Displays the protocol flag markings.
Pkts Displays the total number of packets sampled for this flow (since stats
were last cleared).
vRtr-ID Displays the vRouter context the flow was sample in.
S-Port
Src Port
Displays the source protocol port number.
Msk Displays the route prefix length for route to source IP address.
AS Displays the Autonomous Systems number for the source route (the AS
is either originating AS or peer AS depending on cflowd configuration).
D-Port
Dst Port
Displays the destination protocol port number.
Msk Displays the route prefix length for route to destination IP address
(Forwarding route).
AS Displays the Autonomous Systems number for the destination route
(the AS is either originating AS or peer AS depending on cflowd
configuration)
Nexthop Displays the next-hop address used to forward traffic associated with
the flow.
Avg pkt size Displays the average packet size of a sampled traffic associated with
this flow (total number of packets sampled / total number of packets
sampled).
Active Displays the number of seconds the flow has been active.
Table 84: Tools Dump Cflowd Top-flows Out put Fields (Continued)
Label Description

Table of Contents

Other manuals for Alcatel-Lucent 7450

Related product manuals