Show, Tools, and Clear Command Reference
754 Router Configuration Guide
ipv6 — Displays the IPv6 flow data.
packet-size
Syntax packet-size [ipv4 | ipv6] [clear]
Context tools>dump>cflowd
Description This command displays packet size distribution for sampled IP traffic. Values are displays in decimal
format (1.0 = 100%, .500 = 50%). Separate statistics are maintained and shown for IPv4 and IPv6
traffic.
Output
Sample Output
SR-12# tools dump cflowd packet-size ipv4
IP packet size distribution (801600 total packets):
1-32 64 96 128 160 192 224 256 288 320 352 384 416 448 480
.000 .250 .000 .000 .010 .100 .500 .090 .000 .000 .000 .000 .000 .000 .000
512 544 576 1024 1536 2048 2560 3072 3584 4096 4608 9000
.000 .000 .000 .050 .000 .000 .000 .000 .000 .000 .000 .000
top-flows
Syntax top-flows [ipv4 | ipv6 | mpls] [clear]
Context tools>dump>cflowd
Description This command displays the top 20 (highest traffic volume) flows for IPv4, IPv6 or MPLS traffic types
collected since the cflowd top-flow table was last cleared or initialized.
Output Table 84 describes the tools dump cflowd top-flows output fields.
Table 84: Tools Dump Cflowd Top-flows Out put Fields
Label Description
Ingress Displays the ingress interface ID.
Src IP Displays the source IP address of the flow (IPv4 or IPv6).
Egress Displays the egress interface ID.
Dest IP Displays the destination IP address of the flow (IPv4 or IPv6).
Pr
Proto
Displays the protocol type for flow.
To Next Page
Loading...
