Product information and planning
MPR-e 101
General characteristics (Power Injector)
General characteristics (MPT Power Unit)
Table 24: Power injector general characteristics
Power Injector
Input Voltage range -38.4 to -57.6 Vdc
Standards Compliance (Power Injector)
EMC EN 301 489-1, EN 301 489-4, EN 55022 Class B
Stationary use ETS 300 019 1-3, Class 3.2
Storage ETS 300 019 2-1, Class 1.2
Transportation ETS 300 019 2-2, Class 2.3
Safety EN 60950
Environmental
Operating Temperature
(Guaranteed)
-40° to +65°C
Humidity
(Guaranteed)
0 to 95%, non-condensing
Table 25: MPT Power Unit general characteristics
Standards Compliance (MPT Power Unit)
EMC EN 301 489-1, GR-1089 Class A
Storage ETS 300 019, Class 1.2, GR-3108
Transportation ETS 300 019 1-2, Class 2.3, GR-3108-CORE
Safety EN 60950, UL-60950
Environmental
Operating Temperature
(Guaranteed)
-40° to +65° C
To Next Page
Loading...
