Product information and planning
MPR-e 87
Standard features
Standard features include more radio and site scalability and flexibility for installation teams:
• Limited need for factory presetting of channel frequency or bandwidth
• Supports cellular mobile networks, and microcellular network back and common
carrier, private carrier and data networks, and utility haul applications
• 2G, 2.5G, 3G and LTE network compatible
• Outdoor Unit capacity- and modulation-independent
• Outdoor Unit can support either split-mount or full-outdoor architecture with the
same hardware
• Adaptive packet transport improves performance for priority services
• Output power agility
• ATPC
•XPIC
• Adaptive Modulation
• Packet-based internal cross-connect
• Electrical/Optical Ethernet interfaces
• QoS on the Ethernet traffic
• Software-based configuration
• Packet throughput booster for enhanced bandwidth
Radio configurations
The following radio configurations are available:
•1+0 full outdoor
• 1+0 repeater (with MPT-HC V2, MPT-XP, AND 9558HC only)
• co-channel XPIC full outdoor (with MPT-HC V2, MPT-XP, AND 9558HC only)
used to establish a 2 x (1+0) radio link.
• 1+1 HSB (with MPT-HC V2, MPT-XP, AND 9558HC only) when in Single NE
mode with 7705 SAR configuration (with MPR-e 4.1.0)
To Next Page
