Navigator area
224 MPR-e
Figure 118: Scheduling algorithms
This menu allows to change the scheduler operation.
The scheduling mode can be DWRR or HQP.
If DWRR has been selected the DWRR weight can be assigned to a specific egress
queue (queue 1 to queue 5).
Click on the Defaults button to restore the default algorithm.
Note: The scheduling mode refers only to queue 1 to 5, because for queue 6 to 8 the
scheduling mode is fixed to HQP.
Note: Queue 5 is the highest-priority queue; queue 1 is the lowest-priority queue (valid only
for HQP).
To Next Page
Loading...
