Navigator area
234 MPR-e
• Route Type: the options are Network, Host, and Default.
• Destination an address or a range of IP addresses with the subnet mask.
• Next Hop: the User can select Point to Point Link to address the link on the radio
side or Gateway IP to define the address of a gateway reachable on the TMN In-band
interface.
Figure 136: Static routing
The Add button inserts a new Static Routing Table row above the selected row.
The Add Last inserts a new Static Routing Table row below the last row.
The Delete button deletes the selected Static Routing Table row.
Routing Table
This menu is a read-only window with the IP routing information summary.
Note: For each change, click the Apply button to execute the request.
To Next Page
Loading...
