Alcatel-Lucent 9558HC - 1+1 HSB in Single NE Mode with 7705 SAR Only; Mpt-Hc V2;9558 Hc

Product information and planning
MPR-e 59
In addition to the configurations and topologies described in section 2.1.4.1, the following
radio configuration is available in single NE mode:
• 1+1 HSB SD with the MPT-HC/MPT-XP (RPS module and coupling link) and two
PMCs on the 7705 SAR
1+1 HSB in Single NE mode with 7705 SAR only
Two types of couplers are available for the MPT-HC V2/MPT-XP/9558HC:
• 3 dB/3 dB balanced coupler
• 1 dB/10 dB unbalanced coupler
MPT-HC V2/9558HC
The MPT-HC V2/9558HC is microprocessor-controlled equipment that interfaces the
Ethernet generic Device with the antenna.
The input/output interface can be a standard electrical or optical Gigabit Ethernet interface.
The Ethernet traffic is transmitted over the radio channel according to the configured QoS and
to the scheduler algorithms.
Note: This working mode applies to Release 4.1.0.
Note: The 1+1 configuration with the MPT-HC V2/MPT-XP/9558HC can be implemented
only with an interconnection cable between the two ODUs.
Note: An MPT-HC and an MPT-XP can form a 1+1 configuration with the use of an RPS
cord.
Note: This working mode applies to Release 4.1.0.