Product information and planning
MPR-e 73
MPT-HC V2/9558HC connectivity (1+1 HSB in Single NE mode with
7705 SAR)
In this configuration, the MPT-HC V2/9558HC units can be installed on the same antenna or
different antennas (SD). The two MPT-HC V2/9558HC units must be connected to the
7705 SAR, and if they are on the same antenna, connected to each other using a coupler. See
Figure 24 for an example.
Two types of coupler are available for the MPT-HC V2/9558HC:
• 3 dB/3 dB balanced coupler or 1 dB/10 dB unbalanced coupler
Figure 24: 1+1 HSB for MPT-HC (11-38 GHz)
MPT-XP
MPT-XP is a very high power version of the MPT-HC V2.
Provides +7/8 dB of additional transmit power as compared to equivalent MPT-HC V2.
Note: The 1+1 configuration with MPT-HC V2/9558HC can be implemented only with an
interconnection cable between the two ODUs.
Note: An MPT-HC/9558HC and an MPT-XP can form a 1+1 configuration with the use of a
specific cord.
To Next Page
Loading...
