Alcatel-Lucent 9558HC - Figure 61 Neto Servers Manager; Figure 62 Neto Initial Screen

NE management by software application
MPR-e 173
Figure 61: NEtO Servers Manager
Click on the FTP Server button to start the FTP server. The FTP Server LED will turn
green.
In the example shown in Figure 61, three RMI Resources are detected by the NEtO
Servers Manager. All three RMI Resources are being managed by the NEtO Servers
Manager. This is indicated with the normal status indicator.
3. Check the IP address of the NE (default: 10.0.1.2) and click OK. See Figure 62.
Figure 62: NEtO initial screen
4. A banner appears as shown in Figure 63. If you agree to the Acknowledgement of
Authorization, click on the Accept button.