Alcatel-Lucent 9558HC - Mpt-MC (Mpr-E); Table 68 MPR-E Waveguide Flange Data; Table 69 MPR-A Waveguide Flange Data; Waveguide Flange Data

Functional description
146 MPR-e
Waveguide flange data
MPT-MC (MPR-E)
MPT-MC is similar to MPT-HC V2 from architecture standpoint.
The only differences are:
• MPT-MC cannot be connected in optical -> 100m length cable limitation.
• MPT-MC does not support the XPIC configuration.
Two mechanical solutions are adopted:
• with embedded diplexer for cost optimisation (6 GHz and from 11 GHz to 38 GHz),
where the diplexer is internal to the MPT-MC cabinet; this type of MPT-MC is
identified by one Logistical Item only;
• with external diplexer: due to a vary high number of shifters, the diplexer is external
for the flexibility of the shifter customization (L6, U6, 7 GHz and 8 GHz), where
MPT-MC is composed by two independent units: the EXTERNAL DIPLEXER
assembly (containing the diplexer) and the RF TRANSCEIVER assembly
(containing the RF section); each of this type of MPT-MC is identified by two
Logistical Items, one for the EXTERNAL DIPLEXER assembly and another for the
RF TRANSCEIVER assembly. To read the EXTERNAL DIPLEXER assembly
identification label it is necessary to separate the EXTERNAL DIPLEXER assembly
from the RF TRANSCEIVER assembly.
Table 68: MPR-E waveguide flange data
Wa
ve-
guid
e
Typ
e
5.8
GHz
L6
GHz
U6
GHz
7
GHz
8
GHz
10.5
GHz
11
GH
z
13
GH
z
15
GH
z
18
GH
z
23
GH
z
25
GH
z
38
GH
z
WR1
37
WR1
37
WR1
37
WR
112
WR1
12
WR
75
WR
75
WR
62
WR
62
WR
42
WR
42
WR
42
WR
28
Table 69: MPR-A waveguide flange data
Waveguid
e Type
5.8
GHz
L6
GHz
U6
GHz
7
GHz
8 GHz 11
GHz
15
GHz
18
GHz
23
GHz
38
GHz
WR1
37
WR13
7
WR13
7
WR1
13
WR11
3
WR7
5
WR6
2
WR4
2
WR4
2
WR2
8