Alcatel-Lucent 9558HC - Figure 20 MPT-HC V2;9558 HC Connection (Optical Cable for Traffic and Coaxial Cable for Power Supply); MPT-HC V2;9558 HC Connectivity (Co-Channel XPIC Configuration)

9500 family overview
70 MPR-e
Figure 20: MPT-HC V2/9558HC connection (optical cable for traffic and coaxial cable
for power supply)
The recommended value is 3 Amps.
MPT-HC V2/9558HC connectivity (co-channel XPIC configuration)
In this configuration, the MPT-HC V2/9558HC units must be installed on the OMT that is
directly connected to the antenna. The two MPT-HC V2/9558HC units must be connected to
the Indoor Section as explained in paragraph MPT-HC V2/9558HC connectivity (1+0
configuration).
Note: The MPT-HC V2/9558HC must be connected to a fuse or a breaker on a customer
power distribution box.