Navigator area
190 MPR-e
3. In the Software Package field, select the file descriptor (previously copied to the
PC).
When the Apache FTP server (embedded in the TCO SW Suite) is used, it is
mandatory to copy the SWP component to the FTP root directory:
“\Document and Settings\<login name>\9500MPR-E\res\home”.
For example, “R95MPRE/5_0_0” must to be copied to:
“\Document and Settings\<login name>\9500MPR-E\res\home”. See Figure 84.
Figure 84: Directory for the SW component if Apache FTP server is in use
4. Put a check mark on the Forced check box to download the complete file without any
comparison between the file already present in the stand-by bank and the new file to
be downloaded.
5. Click on the Start Download button.
6. At the end press the Activate button of the Stand-by Software Package. The NE
reboots and the supervision is lost.
Note: The path to the file descriptor, after the SWP local copy, is
/ECT/SWDW/R95MPRE/5_0_0/
To Next Page
Loading...
