Alcatel-Lucent 9558HC - Figure 132 Interfaces; Figure 133 Network Interfaces Attachment to an OSPF Area; Figure 134 Interfaces; Figure 135 Network Interfaces Attachment to an OSPF Area

NE management by software application
MPR-e 233
Figure 132: Interfaces
Select an OSPF Area in which the interface has to be added, then click on the Attach
button.
Figure 133: Network interfaces attachment to an OSPF Area
• How to detach an interface
Figure 134: Interfaces
Select None, then push the Detach button.
Figure 135: Network interfaces attachment to an OSPF Area
Static routing
The Static Routing menu is used to configure the parameters for IP Static Routing
Configuration, see Figure 136.