Product information and planning
MPR-e 129
MPT-HC V2/MPT-XP/9558HC with external diplexer
The diplexer included in the available external diplexer assemblies refers to ITU–R F.385, 
386 and RF special customers channelling with Tx/Rx separation specified in Table 61 
through Table 64. 
Each diplexer is a 3-port passive device with two band–pass filters as shown in Figure 35.
18 1560 1 3DB20432BAXX 17700-18140
3DB20432BBXX
3DB20432BCXX
17700-18140.5
1P 3DB20433BAXX 19260-19700
3DB20433BBXX
3DB20433BCXX
19260-19700.5
23 1200 1 3DB20473BAXX
3DB20473BBXX
21200-21819
1P 3DB20475BAXX
3DB20475BBXX
22400-23019
2 3DB20474BAXX
3DB20474BBXX
21781-22400
2P 3DB20476BAXX
3DB20476BBXX
22981-23600
38 700 1 3DB20379BAXX
3DB20379BCXX
38600-38950
1P 3DB20563BAXX
3DB20563BCXX
39300-39650
2 3DB20562BAXX
3DB20562BCXX
38950-39300
2P 3DB20564BAXX
3DB20564BCXX
39650-40000
Table 57: MPR-A: MPT-HC V2 with internal diplexer