Alcatel-Lucent 9558HC - Figure 106 Radio Configuration: FCM - RTPC

NE management by software application
MPR-e 213
The set point of the ATPC regulation (ATPC RSL threshold) must be chosen
considering the link budget. For example if the set point is too high, the remote
transmitter will permanently remain at maximum power. It is recommended to
choose a value at least 15 dB above the 10-6 BER threshold.
→ Min ATPC Tx power and Max ATPC Tx power
The Min Tx power and Max Tx power, within the Tx Range in the ATPC
management, can be written in the relevant field.
Figure 106: Radio configuration: FCM - RTPC