Alcatel-Lucent 9558HC - Figure 108 Radio Configuration: ACM - RTPC

NE management by software application
MPR-e 215
Figure 108: Radio configuration: ACM - RTPC
8. XPIC (only with MPT-HC V2/MPT-XP)
The XPIC can be configured only for an MPT-HC V2/MPT-XP with the
“RPS + XPIC” external module. XPIC is not available in 1+1 HSB protection.
The XPIC can be configured with or without Adaptive Modulation.
→ In the Modem Profile Option field select a profile with the XPIC.
→ In the XPIC Polarization field select the polarization to be associated with the
MPT-HC V2/MPT-XP: Horizontal or Vertical.
→ Configure the second MPT-HC V2/MPT-XP to be associated in the XPIC
configuration with the same profile and with opposite polarization.