WebEML start
172 MPR-e
Figure 59: Connection lost message
WebEML start
This chapter explains all the screens of the WebEML (JUSM/CT), which is started by a
double click on the WebEML icon on the PC desktop.
The WebEML must be connected to the Ethernet generic device as explained in the
Provisioning chapter.
Refer to Software local copy for information on copying the WebEML from the software
package CD ROM/DVD ROM and connecting the PC to the Ethernet generic device in order
to access the MPT-HC V2/MPT-MC/MPT-XP/9558HC.
1. To start the WebEML, double click on the relevant icon on the PC desktop. See
Figure 60
Figure 60: WebEML desktop icon
2. NEtO and NEtO Server Manager open. See Figure 61.
Note: The PC should be in the same sub-network as the default IP address of the TMN in-
band (first connection); see the Maintenance and trouble-clearing chapter for configuration
information. If TMN in band is different from the Local NE IP, there also needs to be a route
on the PC with the gateway of the TMN in band.
To Next Page
Loading...
