9500 family overview
60 MPR-e
Transmitter circuits in the MPT-HC V2/9558HC consist of an Ethernet input interface,
modulator, local oscillator, up-converter mixer, power amplifier, and diplexer.
Receiver circuits consist of a diplexer, low-noise amplifier, local oscillator, down-converter
mixer, automatic gain control, demodulator and Ethernet output interface.
The microprocessor manages the frequency, transmit power alarming, and performance
monitoring.
The power supply is provided through PFoE (electrical Ethernet cable) or a dedicated power
supply cable.
The MPT-HC V2/9558HC is frequency-dependent.
The MPT-HC V2 is XPIC-ready with the installation of a dedicated module.
Figure 11: 11 GHz MPT-HC V2
The possible configurations are:
• 1+0 (paragraph MPT-HC V2/9558HC connectivity (1+0 configuration))
• co-channel XPIC (paragraph MPT-HC V2/9558HC connectivity (co-channel XPIC
configuration))
• 1+1 HSB in Single NE mode with 7705 SAR (paragraph MPT-HC V2/9558HC
connectivity (1+1 HSB in Single NE mode with 7705 SAR))
MPT-HC V2/9558HC connectivity (1+0 configuration)
The MPT-HC V2/9558HC can be connected to the Ethernet generic Device through:
To Next Page
Loading...
