Change notes
28 MPR-e
Change notes
Manual Structure
This manual has been edited according to the Alcatel-Lucent standardized “drawing-up
guides”.
This manual is divided into the main topics described in Table 3.
Table 3: Manual structure
PREFACE This section contains general information such as preliminary
information, manual scope, and history. As well, it describes the
manual structure and the customer documentation.
SAFETY This section includes all the safety instructions.
PRODUCT
INFORMATION
AND PLANNING
This section provides the equipment description, introduces the
basic information regarding the 9500 MPR-e HW architecture,
and gives its technical characteristics.
NE MANAGEMENT BY
SOFTWARE
APPLICATIONS
This section provides the description and use of the SW tools
available for the NE management.
INSTALLATION This section provides information regarding equipment hardware
installation.
Moreover, it contains operative information on:
• provisioning of equipment items (P/Ns, equipping rules)
• their physical position in the system
• unit assembly and front panel drawings, with the
description on the access point usage (connectors, visual
indicators, buttons).
This also provides operative instructions for the preparation of
the Craft Terminal for the Line-Up and Commissioning of the
two NEs making up the radio link.
PROVISIONING This section provides all the instructions to provision (configure)
the NE.
MAINTENANCE AND
TROUBLE-CLEARING
This section contains the logical and operative information for the
equipment maintenance and system upgrade.
To Next Page
Loading...
